REF 130.01
Permanent cylindrical magnet - alnico type AA 01
-
- Alnico magnet
-
- Alnico magnet
ALuminium NIckel CObalt magnets are castings that offer good mechanical strength and high induction in a closed circuit.
The load-bearing capacity is optimal when the magnet is in contact with a soft, clean steel part, which is clean and sufficiently thick. It decreases for alloyed steels (cast iron -30%), because of an air gap or because of a significant temperature rise (-0.02% per degree C).
The load-bearing capacity is optimal when the magnet is in contact with a soft, clean steel part, which is clean and sufficiently thick. It decreases for alloyed steels (cast iron -30%), because of an air gap or because of a significant temperature rise (-0.02% per degree C).
- ALNICO magnets are machinable and can be cut to size.
- Mounting is done by gluing.
-
Use :
- Sensor
- Separation
- Clamping
- High Tp° system
-
Max. temperature of use :
- 450 °C
-
Density :
- 7.3 gr/cm³
| Qty | Product | Weight in kg | A | B |
|---|---|---|---|---|
| 130.01-4x25 | 0.003 | 4 | 25 | |
| 130.01-5x20 | 0.003 | 50 | 20 | |
| 130.01-5x30 | 0.005 | 5 | 30 | |
| 130.01-6x10 | 0.002 | 6 | 10 | |
| 130.01-6x20 | 0.004 | 6 | 20 | |
| 130.01-8x25 | 0.008 | 8 | 25 | |
| 130.01-8x30 | 0.009 | 8 | 30 | |
| 130.01-8x35 | 0.010 | 80 | 35 | |
| 130.01-8x130 | 0.032 | 8 | 130 | |
| 130.01-9x27 | 0.010 | 9 | 27 | |
| 130.01-10x25 | 0.015 | 100 | 25 | |
| 130.01-10x30 | 0.019 | 10 | 30 | |
| 130.01-11x27 | 0.025 | 11 | 27 | |
| 130.01-12x25 | 0.025 | 12 | 25 |
indication_tableau_dessus
indication_tableau_dessous