REF 130.03
Permanent magnet - alnico type AA 03
-
- Alnico magnet
-
- Alnico magnet
ALuminium NIckel CObalt magnets are castings that offer good mechanical strength and high induction in a closed circuit.
The load-bearing capacity is optimal when the magnet is in contact with a soft, clean steel part, which is clean and sufficiently thick. It decreases for alloyed steels (cast iron -30%), because of an air gap or because of a significant temperature rise (-0.02% per degree C).
The load-bearing capacity is optimal when the magnet is in contact with a soft, clean steel part, which is clean and sufficiently thick. It decreases for alloyed steels (cast iron -30%), because of an air gap or because of a significant temperature rise (-0.02% per degree C).
- ALNICO magnets are machinable and can be cut to size.
- Mounting is done by gluing.
-
Use :
- Mounting
- Lock
- Clamping
-
Max. temperature of use :
- 450 °C
-
Density :
- 7.3 gr/cm³