REF 10.03
PERMANENT MAGNETIC CHUCK FOR MILLING TYPE TF2
-
- High holding power
- Twin magnetic system
- Heavy duty construction
- Waterproof construction
-
- High holding power
- Twin magnetic system
- Heavy duty construction
- Waterproof construction
. Twin magnetic system (magnets inserted into the body and into the top plate)
. Magnetic system wih Neodymium magnets
. Brass separations between the magnetic poles
Included with purchase:
- 1 Actuating key
- Long and short side end stops
- Clamps
-
Use :
- Milling
- Drilling
- Contouring
- Machining
- Planning
-
Nominal force :
- 150 N/cm²
-
Pole pitch :
- 15 mm
- 4 mm of brass
- 11 mm of steel
-
Admissible wear of top plate :
- 6 mm
-
Magnetic field height :
- 10 mm
- Sine table execution
- Fitted to an angle iron for tombstone application
- Part of palletizing system: Erowa, 3R, Hirschmann, Vischer & Boli
| Qty | Product | Weight in kg | A | B | C |
|---|---|---|---|---|---|
| 10.03.250150 | 17,0 | 250 | 150 | 55 | |
| 10.03.300150 | 20,0 | 300 | 150 | 55 | |
| 10.03.350150 | 23,5 | 350 | 150 | 55 | |
| 10.03.450150 | 32,0 | 450 | 150 | 55 | |
| 10.03.300200 | 30,0 | 300 | 200 | 60 | |
| 10.03.400200 | 39,0 | 400 | 200 | 60 | |
| 10.03.450200 | 43,0 | 450 | 200 | 60 | |
| 10.03.500200 | 48,0 | 500 | 200 | 60 | |
| 10.03.600200 | 58,0 | 600 | 200 | 60 | |
| 10.03.400250 | 48,5 | 400 | 250 | 65 | |
| 10.03.500250 | 60,0 | 500 | 250 | 65 | |
| 10.03.400300 | 58,0 | 400 | 300 | 60 | |
| 10.03.500300 | 72,0 | 500 | 300 | 65 | |
| 10.03.600300 | 87,0 | 600 | 300 | 65 |
indication_tableau_dessus
indication_tableau_dessous