REF 130.02
Permanent rectangular magnet - alnico type AA 02
-
- Alnico magnet
-
- Alnico magnet
ALuminium NIckel CObalt magnets are castings that offer good mechanical strength and high induction in a closed circuit.
The load-bearing capacity is optimal when the magnet is in contact with a soft, clean steel part, which is clean and sufficiently thick. It decreases for alloyed steels (cast iron -30%), because of an air gap or because of a significant temperature rise (-0.02% per degree C)
The load-bearing capacity is optimal when the magnet is in contact with a soft, clean steel part, which is clean and sufficiently thick. It decreases for alloyed steels (cast iron -30%), because of an air gap or because of a significant temperature rise (-0.02% per degree C)
- ALNICO magnets are machinable and can be cut to size.
- Mounting is done by gluing.
-
Use :
- Sensor
- Clamping
- High Tp° system
-
Max. temperature of use :
- 450 °C
-
Density :
- 7.3 gr/cm³
| Qty | Product | Weight in kg | A | B | C |
|---|---|---|---|---|---|
| 130.02-20x10x5 | 0.009 | 20 | 10 | 5 | |
| 130.02-32x10x6 | 0.013 | 32 | 10 | 6 | |
| 130.02-40x12.5x5 | 0.020 | 40 | 12.5 | 5 | |
| 130.02-40x19x25 | 0.133 | 40 | 19 | 25 | |
| 130.02-40x25x18.5 | 0.130 | 40 | 25 | 18.5 | |
| 130.02-45x18x10 | 0.057 | 45 | 18 | 10 | |
| 130.02-48x9x10 | 0.030 | 48 | 9 | 10 | |
| 130.02-50x15x10 | 0.060 | 50 | 15 | 10 | |
| 130.02-55x17x25 | 0.165 | 55 | 17 | 25 | |
| 130.02-60x15x5 | 0.035 | 60 | 15 | 5 | |
| 130.02-72x19x25 | 0.240 | 72 | 19 | 25 | |
| 130.02-72x25x18.5 | 0.230 | 72 | 25 | 18.5 | |
| 130.02-75x15x10 | 0.090 | 75 | 15 | 10 | |
| 130.02-82x19x25 | 0.273 | 82 | 19 | 25 | |
| 130.02-97x17x25 | 0.290 | 97 | 17 | 25 | |
| 130.02-100x20x10 | 0.150 | 100 | 20 | 10 | |
| 130.02-120x15x25 | 0.330 | 120 | 15 | 25 |
indication_tableau_dessus
indication_tableau_dessous