REF 120.03
Permanent samarium magnet type AS 03
-
- Samarium magnet
-
- High holding power
-
- Samarium magnet
-
- High holding power
Samarium Cobalt magnets are sintered magnets made of samarium and cobalt samarium powder and cobalt. Samarium Cobalt magnets have a very high magnetic energy. They are brittle ceramics and should not be and should not be used in the presence of chlorine and hydrogen.
The maximum holding power is achieved when the magnet is in contact with a clean steel, clean and sufficiently thick. It decreases for alloyed steels (cast iron -30%), because of an air gap or because of a significant temperature rise (-0.04% per degree C).
The maximum holding power is achieved when the magnet is in contact with a clean steel, clean and sufficiently thick. It decreases for alloyed steels (cast iron -30%), because of an air gap or because of a significant temperature rise (-0.04% per degree C).
- Samarium magnets cannot be machined, they cannot be cut or drilled.
- The assembly is done by gluing.
-
Use :
- High Tp° system
- Prosthesis medical
-
Max. temperature of use :
- 250 °C
-
Density :
- 8.2 gr/cm³
-
Max. surface induction :
- 4000 G
