REF 100.04

Rectangular Ferrite Magnet type AF04

Ferrite magnet

Isotropic or anisotropic ferrite magnets are brown stainless ceramics, obtained by powder metallurgy: pressing and sintering.

Ferrite is a hard but shock-sensitive material. The load-bearing capacity is optimal when the magnet is in contact with a clean, sufficiently thick, soft steel part. It decreases for alloyed steels (cast iron -30%), because of an air gap or because of a temperature rise (-0.4% per degree from 20°C).

Ferrite magnets cannot be machined, cut or drilled.
The assembly is done by gluing.

Magnet according to thickness

Use :
- ILS
- Relay
- Sensor
- Lock

Max. temperature of use :
- 200 °C
Density :
- 4.8 gr/cm³
Resistance in compression :
- 500 N/mm²
Max. surface induction :
- 1500 G

D = Force

Product	Weight in kg	A	B	C	D
100.04-4x4x2	0.0002	4	4	2	0.4N
100.04-5x5x2	0.00025	5	5	2	0.6N
100.04-10x5x3	0.0007	10	5	3	1N
100.04-15x10x5	0.003	15	10	5	1.7N
100.04-20x10x5	0.005	20	10	5	1.9N
100.04-25x9x5	0.006	25	9	5	2N
100.04-25x20x10	0.024	25	20	10	4N
100.04-30x15x5	0.011	30	15	5	2N
100.04-39x10x4	0.0075	39	10	4	2N
100.04-40x20x5	0.020	40	20	5	3N
100.04-40x20x10	0.038	40	20	10	4N
100.04-40x25x8	0.038	40	25	8	4N
100.04-40x25x9	0.043	40	25	9	4.2N
100.04-40x25x10	0.048	40	25	10	4.5N
100.04-43x26x6	0.032	43	26	6	4.5N
100.04-43x26x8	0.043	43	26	8	6N
100.04-48x22x10	0.050	48	22	10	6N
100.04-49.5x9x4.9	0.010	49.5	9	4.9	5N
100.04-50x20x5	0.024	50	20	5	12N
100.04-54.8x9.5x3.5	0.009	54.8	9.5	3.5	8N
100.04-75x50x25	0.450	75	50	25	/
100.04-75x50x25.4	0.457	75	50	25.4	/
100.04-75.5x14x9.8	0.050	75.5	14	9.8	/
100.04-100x75x25.4	0.190	100	75	25.4	/
100.04-100x100x5	0.240	100	100	5	/
100.04-150x50x25	0.900	150	50	25	/
100.04-150x100x15	1	150	100	15	/
100.04-150x100x25	1.8	150	100	25	/

indication_tableau_dessus

indication_tableau_dessous